 |
| Diameter: | |
|---|---|
| Quantity: | |
DM
82029990
Product description
TCT Saw Blade For Cutting Wood
This product is widely used for cutting wood. The blade has good sharpness and high efficiency at the process of cutting.With high working performance, the blade would not chip or break slates while cutting.
They appeared perfect cutting result with a narrow gap and less chipping, will not damage the edge of the wood.
TCT saw blade for cutting aluminum and other non-ferrous profiles with very thin wall thickness. Excellent also for cutting plain aluminum or non-ferrous bars. The work piece must be properly clamped during cutting.
4 Kinds of TCT Circular Saw Blade as follows:
| 1st T.C.T. SAW BLADE FOR WOOD |
| 2nd T.C.T. SAW BLADE FOR ALUMINUM |
| 3rd T.C.T. SAW BLADE FOR LAMINATED PANEL |
| 4th T.C.T. SAW BLADE FOR METAL |
| Item Number | Inches | Diameter(mm) | Segment number |
| 15DN0501001 | 4 | 110 | 12~40 |
| 15DN0501002 | 6 | 150 | 20~40 |
| 15DN0501003 | 7 | 180 | 24~40 |
| 15DN0501004 | 7.5 | 185 | 24~40 |
| 15DN0501005 | 8 | 200 | 40~60 |
| 15DN0501006 | 10 | 250 | 40~80 |
| 15DN0501007 | 12 | 305 | 40~80 |
| 15DN0501008 | 14 | 355 | 40~80 |
| 15DN0501009 | 16 | 405 | 40~160 |
| 15DN0501010 | 18 | 455 | 60~160 |
| 15DN0501011 | 20 | 505 | 60~160 |
| 15DN0501012 | 22 | 550 | 60~160 |
| 15DN0501013 | 24 | 600 | 60~160 |
| 15DN0501014 | 26 | 650 | 60~160 |
| 15DN0501015 | 29.5 | 700 | 40~160 |
Saw Caution
1. Please put alloy saw vertically hang the drying rack, be sure to avoid the damp places, do not place alloy saw on the ground or on a shelf, keeping flat will lead to alloy blade deformation.
2. Use time, does not exceed the maximum speed. Speed method of calculation is attached for information.
3. Use time, must take protective masks, gloves, helmets, working protection shoes, protective glasses.
4. During the installation Alloy saw, must firstly confirm the function, use of saw table, first read the statement of saw table. Avoid mistakes Install so as to cause the accident.
5. During the installation of Alloy saw, you must first check whether there is a split distortion, and fill-ping, swaps and other phenomena teeth on alloy saw, and then install it.
6. Super-hard and sharp ofsawtooth alloy saw,prohibit the collision, falling ground, with taking carefully.
7. After installing the alloy saw blade, the saw core hole must be confirmed whether firmly fixed in the flange of saw table saw, a gasket must be good washer, and then gently hand to push saw blade, confirmed the rotation Whether the eccentric shaking.
Package
Carton box& blister package & wooden case as your demand
Product description
TCT Saw Blade For Cutting Wood
This product is widely used for cutting wood. The blade has good sharpness and high efficiency at the process of cutting.With high working performance, the blade would not chip or break slates while cutting.
They appeared perfect cutting result with a narrow gap and less chipping, will not damage the edge of the wood.
TCT saw blade for cutting aluminum and other non-ferrous profiles with very thin wall thickness. Excellent also for cutting plain aluminum or non-ferrous bars. The work piece must be properly clamped during cutting.
4 Kinds of TCT Circular Saw Blade as follows:
| 1st T.C.T. SAW BLADE FOR WOOD |
| 2nd T.C.T. SAW BLADE FOR ALUMINUM |
| 3rd T.C.T. SAW BLADE FOR LAMINATED PANEL |
| 4th T.C.T. SAW BLADE FOR METAL |
| Item Number | Inches | Diameter(mm) | Segment number |
| 15DN0501001 | 4 | 110 | 12~40 |
| 15DN0501002 | 6 | 150 | 20~40 |
| 15DN0501003 | 7 | 180 | 24~40 |
| 15DN0501004 | 7.5 | 185 | 24~40 |
| 15DN0501005 | 8 | 200 | 40~60 |
| 15DN0501006 | 10 | 250 | 40~80 |
| 15DN0501007 | 12 | 305 | 40~80 |
| 15DN0501008 | 14 | 355 | 40~80 |
| 15DN0501009 | 16 | 405 | 40~160 |
| 15DN0501010 | 18 | 455 | 60~160 |
| 15DN0501011 | 20 | 505 | 60~160 |
| 15DN0501012 | 22 | 550 | 60~160 |
| 15DN0501013 | 24 | 600 | 60~160 |
| 15DN0501014 | 26 | 650 | 60~160 |
| 15DN0501015 | 29.5 | 700 | 40~160 |
Saw Caution
1. Please put alloy saw vertically hang the drying rack, be sure to avoid the damp places, do not place alloy saw on the ground or on a shelf, keeping flat will lead to alloy blade deformation.
2. Use time, does not exceed the maximum speed. Speed method of calculation is attached for information.
3. Use time, must take protective masks, gloves, helmets, working protection shoes, protective glasses.
4. During the installation Alloy saw, must firstly confirm the function, use of saw table, first read the statement of saw table. Avoid mistakes Install so as to cause the accident.
5. During the installation of Alloy saw, you must first check whether there is a split distortion, and fill-ping, swaps and other phenomena teeth on alloy saw, and then install it.
6. Super-hard and sharp ofsawtooth alloy saw,prohibit the collision, falling ground, with taking carefully.
7. After installing the alloy saw blade, the saw core hole must be confirmed whether firmly fixed in the flange of saw table saw, a gasket must be good washer, and then gently hand to push saw blade, confirmed the rotation Whether the eccentric shaking.
Package
Carton box& blister package & wooden case as your demand
